To begin operation of your ACTAtek2, you must make sure it is connected to a 12V DC Power supply with the network cable securely attached to the port. Once your unit is powered up, the following screen should appear, the Hectrix logo, the system clock, the Trigger should appear in the left corner, and the date/day of the system in the right corner. On the next page, the keypad will be described as to how to access the unit for all the functionalities.
There are two ways for a Super Administrator to log in to the ACTAtek2 system, one by fingerprint, and two by password. To login via fingerprint, do read up on the fingerprint enrollment procedure and follow the below steps to login
ACTAtek2 works based on the TCP/IP networking protocol and web server technology, which allows for remote administration via any standard web browser, e.g. Internet Explorer or Netscape Navigator. We have used Internet Explorer as our demonstrative guide; it works the same way with Netscape or any standard web browser. For queries regarding this, contact us at .
After logging in under Super Administrator (Default ID: A999, password: 1), the left panel will differ from the other administrator(s), as can be seen below. All options will be available for configuration and modification of the system and user configurations.
線上教學
