To begin operation of your ACTAtek2, you must make sure it is connected to a 12V DC Power supply with the network cable securely attached to the port. Once your unit is powered up, the following screen should appear, the Hectrix logo, the system clock, the Trigger should appear in the left corner, and the date/day of the system in the right corner. On the next page, the keypad will be described as to how to access the unit for all the functionalities.

Introduction

To begin operation of your ACTAtek2^TM, you must make sure it is connected to a 12V DC Power supply with the network cable securely attached to the port. Once your unit is powered up, the following screen should appear, the Hectrix logo, the system clock, the Trigger should appear in the left corner, and the date/day of the system in the right corner. On the next page, the keypad will be described as to how to access the unit for all the functionalities.

LCD Module

The Standby Screen displayed when the ACTAtek2^TM is first powered up is as shown below. It has basic information such as the company logo, time, trigger type, date and day displayed when the system is idle and is not currently in use.

Keypad Module

The keypad module, displayed below, has various menu options and alpha-numeric keys, below is a brief description of the keypad.

Fingerprint Scanner Module

The biometric fingerprint module uses optical scanner technology with a 500 dpi resolution and it can be accessed either with a 1:1 authentication or 1:M authentication. The 1:M authentication, although convenient, has its limitation in the maximum number of users.

With any database, the more users in the system, the slower the authentication & verification time of the unit since the system has to check its entire database for that 1 specific fingerprint for authentication. It is therefore highly recommended for users to key in their ID, and then presents their fingerprint for a much quicker & accurate verification process.